联系我们

联系人: 刘经理 手机: 15953131568        18888346536 QQ: 408031499 网址: http://www.cishanfst.com 地址: 济南市天桥区金牛建材市场

新闻中心当前位置:秒速牛牛—新闻中心

彩钢卷帘门质量控制六要素!
来源:http://www.cishanfst.com  2019-10-10 16:29:08
一,要素说明
I. Element Description
彩钢卷门生产过程控制
Production process control of color steel coil door
对于产品实现的全过程,包括技术谈判,技术确认,技术输出,采购验证,生产加工,过程检查,安装检查等,通过过程控制来确保产品和服务质量。
For the whole process of product realization, including technology negotiation, technology validation, technology output, procurement verification, production and processing, process inspection, installation inspection, etc., process control is used to ensure the quality of products and services.
二,检验测试
2. Inspection and testing
为了确保最终产品的质量,对正确的检查方法,适当的检查工具和适当的检查人员进行了检查,以测试原材料,过程,装置等,并为产品的最终鉴定提供证据。
In order to ensure the quality of the final product, the correct inspection methods, appropriate inspection tools and appropriate inspectors are inspected to test raw materials, processes, devices, etc., and to provide evidence for the final identification of the product.
三,最终检验
Third, final inspection
根据工厂的要求进行最终产品检验,并按照甲方的要求将产品安装后提交检验。通过最终检验为项目提供合格的产品

The final product is inspected according to the requirements of the factory and submitted for inspection after installation according to the requirements of Party A. Provide qualified products for the project through final inspection

济南卷帘门厂

四,检验状况
IV. Inspection status
在产品加工过程中,按照规定完成安装过程,以确保所有合格的产品都可以进入下一个过程。
In the process of product processing, the installation process is completed according to the regulations to ensure that all qualified products can enter the next process.
五,不良品控制
Fifth, control of defective products
对于过程控制中出现的不合格产品,应及时使用状态指示器隔离,并按照返工,维修,降级或报废的程序进行不合格处理,并对不合格产品进行处理。 处置后应重新检查和测试。 通过测试后,您可以进入下一个过程。
For non-conforming products appearing in process control, the status indicator should be used to isolate them in time, and the non-conforming products should be handled according to the procedures of rework, maintenance, degradation or scrap, and the non-conforming products should be handled. After disposal, it should be re-examined and tested. After passing the test, you can go to the next process.
六,纠正和预防措施
Sixth, corrective and preventive measures
对于彩钢卷门的故障,应及时采取纠正措施,并根据情况进行分析,并采取预防措施,防止不合格品再次发生。
For the faults of color steel coil doors, corrective measures should be taken in time, and analysis should be made according to the situation, and preventive measures should be taken to prevent the recurrence of unqualified products.
广发公众号 极速快乐8 秒速牛牛官网 河北快3开奖 秒速牛牛技巧 六合开奖网址 福建11选5开奖 吉林快三机器人 香港开奖结果2019开奖记录 秒速牛牛计划